LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (2.4L Engine (Service Information)) >> Cylinder Head >> Bucket, Tappet >> Standard Procedure >> Standard Procedure - Measuring Valve Lash >> Clearance Too Small

Clearance Too Small

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Tappet Identification
GC0082431Courtesy of CHRYSLER GROUP, LLC
  1. Remove camshafts. Refer to CAMSHAFT, ENGINE, REMOVAL .
  2. Specification - clearance = change.
  3. Decrease tappet thickness by change figure.
  4. Install camshafts. Refer to CAMSHAFT, ENGINE, INSTALLATION .
  5. Verify that valve lash is correct.
scientia non olet · About LEMON Manuals