LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Lamps/Lighting - Exterior (Service Information)) >> Standard Procedure >> Standard Procedure - Lamp Alignment >> Fog Lamp Alignment

Fog Lamp Alignment

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

A properly aimed front fog lamp will project a pattern on the alignment screen 100 millimeters (4 inches) below the fog lamp centerline and straight ahead of the lamp for domestic market vehicles. On export market vehicles, a properly aimed fog lamp will project a pattern on the alignment screen 200 millimeters (8 inches) below the fog lamp centerline and straight ahead of the lamp.

Fig 1: Fog Lamp Adjustment Screw
GC0128612Courtesy of CHRYSLER GROUP, LLC
  1. Turn the fog lamps ON.
  2. Raise the lower portion of the inner wheel house shield to gain access to the rear of the fog lamp unit.
  3. Rotate the vertical adjustment screw (1) on each lamp to adjust the beam height as required.