LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Lamps/Lighting - Exterior (Service Information)) >> Lamp, License Plate >> Removal >> Bulb

Lamp, License Plate: Removal: Bulb

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: License Plate Lamp Bulb Socket
GC0128619Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the license plate lamp from the underside of the liftgate handle and light bar assembly. Refer to LAMP  .
  3. Pull the base of the bulb straight out of the license plate lamp bulb socket (1).
scientia non olet · About LEMON Manuals