Lamp, Fog: Installation: Lamp

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fog Lamp Bulb, Housing & Latch Features

Courtesy of CHRYSLER GROUP, LLC

Position the front fog lamp mounting bracket (3) to the fog lamp bezel on the back of the lower front fascia (4).
Install and tighten the three screws (1) that secure the mounting bracket to the bezel. Tighten the screws securely.
Reconnect the headlamp and dash wire harness connector to the front fog lamp bulb (2) connector receptacle.
Reinstall the lower inner front wheel house splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
Reconnect the battery negative cable.
Confirm proper fog lamp alignment. Refer to STANDARD PROCEDURE .