General Specifications

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

CLUTCH SPECIFICATIONS

DESCRIPTION	MILLIMETERS	INCHES
Low/Reverse Clutch Pack Clearance	0.89 -1.47	0.035 -0.058
Reverse Clutch	0.76 - 1.245	0.030 - 0.049
Overdrive Clutch	0.491 - 2.345	0.019 -.092
Underdrive Clutch	0.91 - 1.47	0.036 - 0.058
2/4 Clutch Clearance	0.76 - 2.64	0.030 - 0.104
Input Shaft End Play	0.13 - 0.635	0.005 to 0.025
Low Clutch Clearance	0.48 - 0.76	0.019 -0.030
Direct Clutch Pack Clearance	0.95 - 1.41	0.037 - 0.056

GEAR TRAIN MEASUREMENTS

DESCRIPTION	MILLIMETERS	INCHES
Front Sun Gear Bushings	29.55 - 29.60	1.163 -1.165
Rear Carrier Bushing	29.75 - 30.00	1.171 - 1.181
Overdrive Hub / Shaft Bushing	21.52 - 21.58	0.847 - 0.850
Oil Pump Reaction Support Sleeve	45.27 - 45.31	1.782 - 1.784
Oil Pump Outer Gear to Pump Pocket	0.089-0.202	0.0035-0.0079
Oil Pump Outer Gear to Crescent	0.060-0.298	0.0023 - 0.0117
Oil Pump Inner Gear to Crescent	0.093 - 0.385	0.0036 - 0.0151
Oil Pump Between Both Gear end Faces and the Reaction Shaft Support	0.020-0.046	0.0008-0.0018
Front / Rear Carrier Pinion end Play	0.15 - 0.61	0.006 - 0.024
Torque Converter Hub Bushing	38.019 - 38.11	1.499 - 1.501
Output Carrier Pinion End Play	0.15 - 0.76	0.006 - 0.030
Direct Clutch Retainer Bushing	39.71 - 39.75	1.563 - 1.565
Low Clutch Retainer Bushing (Steel)	28.22 - 28.26	1.111 - 1.113
Low Clutch Retainer Bushing (Brass)	30.01 - 30.03	1.181 - 1.182

TURNING TORQUE SPECIFICATIONS

DESCRIPTION	N.m	Ft. Lbs.	In. Lbs.
Output Shaft Gear Drag Torque	0.4 - 1.0	-	3 - 8
Final Drive Remote Pinion Drag Torque	0.2 - 1.0	-	2 - 8
Differential Turning Torque	1.0 - 2.5	-	10 - 22