LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (40TE/41TE Automatic Transmission (Service Information)) >> Diagnosis And Testing >> Hydraulic Pressure Tests >> Test Six-Selector In Reverse

Test Six-Selector In Reverse

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach gauges to the reverse and LR clutch tap.
  2. Move selector lever to the (R) position.
  3. Read reverse clutch pressure with output stationary (foot on brake) and throttle opened to achieve 1500 RPM.
  4. Reverse and LR clutch pressure should read 165 to 235 psi.
  5. This test checks the reverse clutch hydraulic circuit.
scientia non olet · About LEMON Manuals