LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Base Brakes (Service Information)) >> Diagnosis And Testing >> Diagnosis And Testing - Base Brake System >> Brake Noise

Brake Noise

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
CONDITION POSSIBLE CAUSES CORRECTION
CLICK OR SQUAWK ON PEDAL APPLICATION 1. Brake lamp switch. 1. Replace switch.
2. Brake Transmission Shift Interlock Linkage (BTSI). 2. Lubricate BTSI linkage.
3. Pedal pivot bushings 3. Lubricate pivot bushings. Replace if necessary.
DISC BRAKE CHIRP 1. Excessive brake rotor runout. 1. Follow brake rotor diagnosis and testing. Correct as necessary. Refer to DIAGNOSIS AND TESTING .
2. Lack of lubricant on brake caliper slides. 2. Lubricate brake caliper slides.
3. Caliper/shoes not fully seated. 3. Reseat caliper/shoes.
DISC BRAKE RATTLE OR CLUNK 1. Broken or missing anti-rattle spring clips. 1. Replace anti-rattle spring clips.
2. Caliper guide pins/bolts loose. 2. Tighten guide pins/bolts.
DISC BRAKE SQUEAK AT LOW SPEED (WHILE APPLYING LIGHT BRAKE PEDAL EFFORT) 1. Brake shoe linings. 1. Replace brake shoes.
SCRAPING (METAL-TO-METAL). 1. Foreign object interference with brakes. 1. Inspect brakes and remove foreign object.
2. Brake shoes worn out. 2. Replace brake shoes. Inspect rotors. Reface or replace as necessary.