Cable, Hood Release: Removal: Removal
WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
- Remove left front cowl trim panel.
- Remove screws (2) attaching hood release handle (1) to inner cowl panel.
- Disconnect the hood release cable from the latch handle.
- Disengage rubber grommet at lower dash panel.
- Disengage push-in fastener (3) attaching hood release cable (4) to dash panel.
- Remove hood latch. Refer to LATCH, HOOD, REMOVAL .
- Release clips (2) attaching hood release cable to left inner frame rail.
- Remove hood release cable (1) from vehicle.