LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Body Control Module (BCM) - DTCS B1812-2A To U1433-24) >> DTC Troubleshooting >> U1433-24-Implausible Ignition Switch Status Message Received - Signal Stuck High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

The BCM detects that the CAN bus message transitions between ignition off and ignition on, but the hardwired ignition switch input voltage from the RF Hub module did not change states.

scientia non olet · About LEMON Manuals