LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Body Control Module (BCM) - DTCS B1812-2A To U1433-24) >> DTC Troubleshooting >> U1433-23-Implausible Ignition Switch Status Message Received - Signal Stuck Low >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

The BCM detects that the hardwired ignition switch input voltage from the RF Hub module indicates that the ignition switch is in the off position, but the CAN bus message indicates that the ignition switch is the run position for more than 10 seconds.