LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Front Half Shaft) >> Diagnosis And Testing >> Diagnosis And Testing - HALFSHAFT >> Vibration At Highway Speeds

Vibration At Highway Speeds

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Vibration associated with the CV joints in the halfshafts occur in the 3rd and 8th order (3 or 8 events for each rotation). The inner tripod joint with three pivot axis has three events in each rotation of the halfshaft. This will produce a 3rd order vibration of the wheel rotation speed. The outer CV joint with 8 pivot axis balls has eight events in each rotation of the halfshaft. This will produce a 8th order vibration of the wheel rotation speed. An 8th order vibration will create a high pitch sound, like gear noise. Use a vibration analyzer to determine the frequency of the vibration before replacing components.

SYMPTOM POSSIBLE CAUSE REPAIR
Low frequency vibration, matching wheel speed. Wheel balance and runout is OK. Foreign material (plastic bags, organic sinew and road debris) fouling the halfshaft. Clean debris from around halfshaft.
High frequency vibration matching 3rd order wheel speed.
  1. Faulty inner tripod joint.
  2. Vehicle ride height is modified.
  1. Replace halfshaft.
  2. Return vehicle to proper ride height.
High pitch whine sound with possible high frequency vibration in the floor matching 8th order wheel speed.
  1. Faulty outer CV joint.
  2. Vehicle ride height is modified.
  1. Replace halfshaft.
  2. Return vehicle to proper ride height.
scientia non olet · About LEMON Manuals