LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Ignition System (Service Information)) >> Solenoid, Variable Valve Timing - 2.4L >> Removal >> Rear Solenoid 1/2

Rear Solenoid 1/2

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Solenoid Location 1/2
GC0082440Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect negative battery cable.
  2. Remove engine cover.
  3. Disconnect variable valve timing solenoid electrical connector.
  4. Remove variable valve timing solenoid mounting bolt.
    Fig 2: Rear Variable Valve Timing Solenoid
    GC0082441Courtesy of CHRYSLER GROUP, LLC
  5. Pull solenoid straight out of cylinder head.
scientia non olet · About LEMON Manuals