Diagnostic Test
WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
VERIFY THE DTC IS ACTIVE
NOTE:
This DTC must be active for the results of this test to be valid.
- Turn the ignition on.
- With the scan tool, read and record DTCs.
- With the scan tool, erase DTCs.
- Start the engine.
- With the scan tool, read and record DTCs.
Is the DTC active at this time?
Yes
- Replace the Anti-Lock Brake System (ABS) Module in accordance with the Service Information. Refer to MODULE, ANTI-LOCK BRAKE SYSTEM, REMOVAL .
- Perform the ABS VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- Test complete.