LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Heating & Air Conditioning (Service Information)) >> Distribution, Front >> Housing, HVAC >> Installation >> Housing-Air Inlet

Housing-Air Inlet

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

LHD model shown in illustration. RHD model similar.

Fig 1: Removing/Installing Air Inlet Housing
GC0082721Courtesy of CHRYSLER GROUP, LLC
  1. Install the air inlet housing (2) onto the top of the HVAC housing (3) and engage the two plastic retaining tabs (4). Make sure the retaining tabs are fully engaged.
  2. Install the four screws (1) that secure the air inlet housing to the HVAC housing. Tighten the screws to 1.2 N.m (10 in. lbs.).
  3. If equipped, install the cabin air filter. Refer to FILTER, CABIN AIR, INSTALLATION .
  4. Install the HVAC housing assembly. Refer to HOUSING, HVAC, INSTALLATION .
scientia non olet · About LEMON Manuals