LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (3.6L Engine (Service Information)) >> Valve Timing >> Standard Procedure >> Resetting Left Cam Chain TENSIONER >> With Engine Timing Cover Removed

With Engine Timing Cover Removed

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Slot In Rack & Allen Wrench
GC0144149Courtesy of CHRYSLER GROUP, LLC
NOTE:

The slot (2) in the rack provides an anchor point for a pin that holds the rack in the retracted position.

  1. Using a suitable tool, such as an Allen wrench (1), lift the pawl off of the rack.
  2. While holding the pawl off of the rack, push the rack and the piston into the tensioner body.
    Fig 2: Inserting Tensioner Pin To Hold Rack & Piston In Retracted Position
    GC0144150Courtesy of CHRYSLER GROUP, LLC
  3. When the slot is aligned with the hole in the tensioner body, insert Tensioner Pin (special tool #8514, Pins, Tensioner) (1) to hold the rack and piston in the retracted position.
scientia non olet · About LEMON Manuals