LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 ((Radio Frequency (RF Hub) Module - Electrical Diagnostics)) >> DTC Troubleshooting >> U1433-01-Implausible Ignition Switch Status Message Received - General Electrical Failure >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

The Radio Frequency Hub (RF Hub) receives a Bussed Input message of the Ignition Switch status from the Body Control Module (BCM). If that message does not agree with the RF Hub Ignition Switch status, this code will set. The BCM also sends a Ignition Switch "Sensor" message (hard wired F20 circuit). If the RF Hub and the BCM do not agree on Both of those messages, the PCM will not allow the engine to start.

scientia non olet · About LEMON Manuals