LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Fuel System) >> Fuel Delivery, Gas >> Tube, Fuel Tank Filler >> Removal >> AWD

Tube, Fuel Tank Filler: Removal: AWD

WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Fill Tube AWD
GC0128859Courtesy of CHRYSLER GROUP, LLC
1 - Canister filter line quick connect fitting
2 - Recirculation line quick connect fitting
3 - Fuel filler tube
  1. Disconnect and isolate negative battery cable at battery.
  2. Remove fuel cap.
  3. Remove the inner splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL .
  4. Disconnect the quick connect fitting (1) and remove the canister filter line. Refer to FITTING, QUICK CONNECT  .
  5. Disconnect the quick connect fitting (2) and remove the recirculation line. Refer to FITTING, QUICK CONNECT  .
  6. Loosen the hose clamp and remove the fuel filler tube (3) from the fuel tank.
    Fig 2: Filler Tube Mounting Bracket Bolt
    GC0128860Courtesy of CHRYSLER GROUP, LLC
    1 - Filler tube mounting bracket bolt
    2 - Filler tube mounting bracket
    3 - Filler tube mounting bracket body mount
  7. Remove filler tube mounting bracket bolt (1) from bracket (2) and body mount (3).
    Fig 3: Fuel Filler Tube AWD
    GC0128861Courtesy of CHRYSLER GROUP, LLC
    1 - Fuel door housing assembly
    2 - Fuel filler tube
  8. Remove fuel filler tube (2) from the fuel door housing assembly (1).
scientia non olet · About LEMON Manuals