LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> 3.6L - DTCS P0653 To P2128 >> Diagnosis And Testing >> P2127-Accelerator Pedal Position Sensor 2 Circuit Low >> Set Condition

Set Condition

The Powertrain Control Module (PCM) detects that the APP Sensor 2 input voltage is below the minimum acceptable value. Acceleration rate and Engine output are limited. One trip fault and the code will set within 5 seconds. ETC light is flashing.

scientia non olet · About LEMON Manuals