LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> 3.6L - DTCS P0653 To P2128 >> Diagnosis And Testing >> P0830-Clutch Pedal Switch "A" Circuit >> Set Condition

Set Condition

The Powertrain Control Module (PCM) does not detect changes in the Clutch Interlock Switch Signal circuit voltage or the Clutch Upstop Signal circuit voltage while CAN messages from the Transmission Control Module indicate transmission gear changes.

scientia non olet · About LEMON Manuals