LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> 3.6L - DTCS P0157 To P0457 >> Diagnosis And Testing >> P0335-Crankshaft Position Sensor Circuit >> Set Condition

Set Condition

No CKP signal is present during engine cranking and at least eight Camshaft Position Sensor signals have occurred. One Trip Fault. Three good trips to turn off the MIL. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active. 

scientia non olet · About LEMON Manuals