LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) >> Valve Timing >> Standard Procedure >> Resetting Left Cam Chain TENSIONER >> With Engine Timing Cover Removed

With Engine Timing Cover Removed

Fig 1: Locating Slot In Rack & Allen Wrench
GC0144149Courtesy of CHRYSLER GROUP, LLC
NOTE:

The slot (2) in the rack provides an anchor point for a pin that holds the rack in the retracted position.

  1. Using a suitable tool, such as an Allen wrench (1), lift the pawl off of the rack.
  2. While holding the pawl off of the rack, push the rack and the piston into the tensioner body.
    Fig 2: Inserting Tensioner Pin To Hold Rack & Piston In Retracted Position
    GC0144150Courtesy of CHRYSLER GROUP, LLC
  3. When the slot is aligned with the hole in the tensioner body, insert Tensioner Pin (special tool #8514, Pins, Tensioner) (1) to hold the rack and piston in the retracted position.
scientia non olet · About LEMON Manuals