LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) >> Lubrication >> Pan, Oil >> Removal >> Lower

Pan, Oil: Removal: Lower

Fig 1: Lower Oil Pan & Fasteners
GC0154003Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Drain the engine oil. Refer to STANDARD PROCEDURE  .
  3. Remove twelve bolts (4), two nuts (3) and two studs (2) from the flange of the lower oil pan (1).
    CAUTION:

    Do not pry on the lower oil pan flange. There are no designated pry points for lower oil pan removal. Prying on only one or a few locations could bend the flange and damage the pan.

  4. Apply a side force to the lower oil pan (1) in order to shear the sealant bond and remove the pan.
  5. Remove all residual sealant from the upper and lower oil pans. Refer to CLEANING  .
scientia non olet · About LEMON Manuals