LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) >> Engine Mounting >> Insulator, Engine Mount, Rear >> Removal >> Removal >> Automatic Transmission

Automatic Transmission

Fig 1: Identifying Skid Plates
GC0131112Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Using a suitable jack stand and a block of wood positioned under the transfer case, raise the transmission until the weight is off of the isolator.
  3. Remove the skid plate and transmission crossmember (7). Refer to CROSSMEMBER, TRANSMISSION, REMOVAL .
scientia non olet · About LEMON Manuals