Rear Disc Brake Pads

Fig 1: Caliper Adapter, Mounting Bolts & Inboard/Outboard Brake Pad

Courtesy of CHRYSLER GROUP, LLC

Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
Clean caliper mounting adapter and anti-rattle springs.
Install anti-rattle springs.
NOTE:
Anti-rattle springs are not interchangeable.
Install inboard brake pad (3) in adapter (1).
Install outboard brake pad (4) in adapter (1).
Install caliper. Refer to CALIPER, DISC BRAKE, INSTALLATION .
Install wheel and tire assemblies and lower vehicle. Refer to WHEELS, STANDARD PROCEDURE .
Apply brakes several times to seat caliper pistons and brake pads to obtain firm pedal.
Top off master cylinder fluid level.