LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Base Brakes (Service Information) >> Hydraulic/Mechanical >> Adapter, Disc Brake Caliper >> Removal >> Rear

Adapter, Disc Brake Caliper: Removal: Rear

Fig 1: Disc Brake Caliper Adapter Components - Rear
GC0130656Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle.
  2. Remove the wheel and tire assembly.
  3. Remove the caliper (1). Refer to CALIPER, DISC BRAKE, REMOVAL .
  4. Remove the disc brake caliper from the adapter.
    CAUTION:

    Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.

    Fig 2: Caliper Adapter, Mounting Bolts & Inboard/Outboard Brake Pad
    GC0130657Courtesy of CHRYSLER GROUP, LLC
  5. Remove the inboard (3) and outboard brake pads (4). Refer to PADS AND/OR SHOES, BRAKE, REMOVAL .
  6. Remove the caliper adapter mounting bolts (2).
scientia non olet · About LEMON Manuals