LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Base Brakes (Service Information) >> Hydraulic/Mechanical >> Adapter, Disc Brake Caliper >> Removal >> Front

Adapter, Disc Brake Caliper: Removal: Front

  1. Raise and support the vehicle.
  2. Remove the front wheel and tire assembly.
    Fig 1: Identifying Disc Brake Caliper & Components
    GC0130323Courtesy of CHRYSLER GROUP, LLC
  3. Remove the caliper (4) from the adaptor (3). Refer to CALIPER, DISC BRAKE, REMOVAL .
  4. Remove the disc brake caliper (1) from the adapter (4).
    CAUTION:

    Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.

    Fig 2: Caliper Adapter Mounting Bolts, Inboard/Outboard Brake Pads & Caliper Adapter
    GC0130655Courtesy of CHRYSLER GROUP, LLC
  5. Remove the inboard (2) and outboard brake pads (3). Refer to PADS AND/OR SHOES, BRAKE, REMOVAL .
  6. Remove the caliper adapter mounting bolts (1).
  7. Remove the caliper adapter (4).
scientia non olet · About LEMON Manuals