Adapter, Disc Brake Caliper: Installation: Rear

Fig 1: Caliper Adapter, Mounting Bolts & Inboard/Outboard Brake Pad

Courtesy of CHRYSLER GROUP, LLC

1. Install the caliper adapter mounting bolts (2) and tighten to 105 N.m (77 ft.lbs).
2. Install the inboard (3) and outboard pads (4). Refer to PADS AND/OR SHOES, BRAKE, INSTALLATION .
   Fig 2: Disc Brake Caliper Adapter Components - Rear

   Courtesy of CHRYSLER GROUP, LLC
3. Install the caliper. Refer to CALIPER, DISC BRAKE, INSTALLATION .
4. Install the tire and wheel assembly. Refer to WHEELS, STANDARD PROCEDURE .