Instrument Panel - Passenger Side

Install the speaker through the glove box opening.

Fig 1: Speaker Electrical Connector & Instrument Panel Wiring Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Connect the speaker electrical connector (1) to the instrument panel wiring harness connector (2).

Fig 2: Speaker Fastener & Glove Box Opening
Courtesy of CHRYSLER GROUP, LLC
Install the speaker (2) fastener (1) through the glove box opening and securely tighten.

Fig 3: Speaker & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Install the two speaker (1) fasteners (2) through the end cap opening and securely tighten.
Install the instrument panel end cap.
Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, INSTALLATION .
Connect the negative battery cable.