Brake Lamps

The brake (or stop) lamps and the Center High Mounted Stop Lamp (CHMSL) each have a path to ground at all times through a takeout and eyelet terminal of the body wire harness that is secured by a nut to a ground stud on the body sheet metal within the passenger compartment. The CHMSL receives battery voltage directly on the brake lamp switch output circuit when the brake lamp switch is closed by the brake pedal arm. The TIPM also receives battery voltage on the brake lamp switch output circuit, which it uses as a signal to energize the brake lamps. The TIPM provides battery voltage to the brake lamps through a high side driver on the tail/stop lamp rear feed circuit when it receives the proper input from the closed brake lamp switch.