LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lamps/Lighting - Exterior (Service Information) >> Lamp, UNDERHOOD >> Removal >> Lamp

Lamp, UNDERHOOD: Removal: Lamp

Fig 1: Identifying Underhood Lamp
GC0130804Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Disconnect the headlamp and dash wire harness connector (4) from the underhood lamp (3) connector receptacle.
  3. Remove the bulb from the underhood lamp. Refer to LAMP, UNDERHOOD, REMOVAL .
  4. Remove the push pin type blind rivet (2) from within the lamp housing that secures the underhood lamp mounting bracket to the inner hood panel reinforcement (1).
  5. Remove the underhood lamp and bracket from the inner hood panel as a unit.
scientia non olet · About LEMON Manuals