Lamp, License Plate: Removal: Bulb
Courtesy of CHRYSLER GROUP, LLC
- Disconnect and isolate the battery negative cable.
- Reach under the license plate lamp hood (1) to access and squeeze together the two latch tabs (4) integral to license plate lamp lens (3).
- Pull the lens downward and back out of the hood far enough to access the bulb socket (2).
- Firmly grasp the bulb socket on the back of the lens and rotate it counterclockwise about 30 degrees to unlock it.
- Pull the socket and bulb straight out from the keyed opening in the lens.
- Firmly grasp and pull the bulb straight out of the socket.