Lamp, Fog, Front: Removal: Lamp

Fig 1: Front Fog Lamp Housing & Front Bumper Cover

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the battery negative cable.
For export market vehicles, turn the front wheels fully in either direction.
Raise and support the vehicle.
For domestic market vehicles, remove the front bumper lower air dam from the vehicle.
Disconnect the engine compartment wire harness connector from the front fog lamp bulb connector receptacle (4).
Remove the four screws (3) that secure the front fog lamp housing (1) to the back of the front bumper cover (2).
Remove the lamp from the back of the front bumper cover.