Cylinder, Lock: Removal: Removal

Fig 1: Removing/Installing Inner Latch Trim

Courtesy of CHRYSLER GROUP, LLC

Using a trim stick (special tool #C-4755, Trim Stick) or equivalent, remove the inner latch trim (2).

Fig 2: Removing/Installing Lock Rod
Courtesy of CHRYSLER GROUP, LLC
Release the clip (3) and disconnect the lock rod (2).

Fig 3: Removing/Installing Handle
Courtesy of CHRYSLER GROUP, LLC
Remove the clip (5).

Fig 4: Removing/Installing Lock Cylinder & Gasket
Courtesy of CHRYSLER GROUP, LLC
Remove the lock cylinder (2) and the gasket (1).