LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (5.7L Engine (Service Information)) >> Valve Timing >> TENSIONER, Engine Timing >> Standard Procedure >> Standard Procedure - Resetting Timing Chain TENSIONER

Standard Procedure - Resetting Timing Chain TENSIONER

WARNING: This page is about a different variant/trim than selected.
Fig 1: Tensioner Body, Washer, Spring & Plunger
GC0095590Courtesy of CHRYSLER GROUP, LLC
NOTE:

Verify that the tensioner is assembled correctly.

  1. Install the washer (1), spring (2), and plunger (3) inside the tensioner body (4).
    Fig 2: Tensioner Pin, Guide Shoe & Tensioner Body
    GC0095591Courtesy of CHRYSLER GROUP, LLC
  2. Squeeze the tensioner body (3) and movable guide shoe (2) together and install Tensioner Pin (special tool #8514, Pins, Tensioner) (1).
scientia non olet · About LEMON Manuals