LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (3.0L Turbo Diesel (Service Information)) >> Valve Timing >> Cover(S), Engine Timing >> Removal >> Lower Timing Chain Cover

Lower Timing Chain Cover

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable.
  2. Remove the right and left upper timing chain cover. Refer to COVER(S), ENGINE TIMING, REMOVAL  .
    Fig 1: Vibration Damper & Bolt
    GC0146664Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    The crankshaft damper bolt is a left hand thread.

  3. Remove the vibration damper (2). Refer to DAMPER, VIBRATION, REMOVAL  .
    Fig 2: Generator Mounting Bracket & Bolts
    GC0146729Courtesy of CHRYSLER GROUP, LLC
  4. Remove the generator. Refer to GENERATOR, REMOVAL .
  5. Remove bolts (2) and the generator mounting bracket (1).
    Fig 3: Lower Timing Chain Cover & Bolts
    GC0146662Courtesy of CHRYSLER GROUP, LLC
  6. Remove the five oil pan-to-lower timing chain cover bolts.
  7. Remove bolts (1 and 3) and the lower timing chain cover (2).
scientia non olet · About LEMON Manuals