LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (3.0L Turbo Diesel (Service Information)) >> Cylinder Head >> Valves, Intake And Exhaust >> Standard Procedure >> Valve Service >> Valve Seat Refacing

Valve Seat Refacing

WARNING: This page is about a different variant/trim than selected.
  1. Install a pilot of the correct size in the valve guide bore. Reface the valve seat to the specified angle with a good dressing stone. Remove only enough metal to provide a smooth finish.
  2. Use tapered stones to obtain the specified seat width when required.
scientia non olet · About LEMON Manuals