LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Front Half Shaft) >> Diagnosis And Testing >> Diagnosis And Testing - Half Shaft >> Noise/Vibration In Turns

Noise/Vibration In Turns

WARNING: This page is about a different variant/trim than selected.

A clicking noise or vibration in turns could be caused by a damaged outer C/V or inner tripod joint seal boot or seal boot clamps. This will result in the loss/contamination of the joint grease, resulting in inadequate lubrication of the joint. Noise could also be caused by another component of the vehicle coming in contact with the half shafts.

scientia non olet · About LEMON Manuals