Except SRT
CAUTION:
Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.
- Disconnect and isolate the battery negative cable.
- Reach through the outboard opening in the front of the front wheel house splash shield to access the back of the front fog lamp.
- Disconnect the headlamp and dash wire harness connector from the front fog lamp bulb connector receptacle.
- Firmly grasp the bulb by the two latch features (2) and squeeze them together to unlock the bulb from the back of the front fog lamp housing (3).
- Pull the bulb straight out from the keyed opening in the housing.