Cluster Hood, Lens And Mask

Fig 1: Instrument Cluster & Lens

Courtesy of CHRYSLER GROUP, LLC

Position the cluster lens (2), over the face of the instrument cluster (1).
Press firmly and evenly on the lens, until each of the latches are fully engaged around the perimeter of the cluster housing.

Fig 2: Instrument Cluster & Bezel
Courtesy of CHRYSLER GROUP, LLC
Install the Instrument Cluster Bezel (2). Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
Install the instrument cluster into the instrument panel. Refer to CLUSTER ASSEMBLY .
Connect the negative battery cable.