Diagnostic Test

CHECK FOR OTHER ACTIVE DTCS

NOTE:

When this DTC is set, the module must be replaced. Diagnose and repair all DTCs prior to module replacement.

With the scan tool, read DTCs.
Are any other active DTCs present?

Yes
- Perform the appropriate diagnostic procedure for each DTC. Repair all DTCs. Replace the BCM in accordance with the Service Information. Refer to MODULE, BODY CONTROL, REMOVAL .
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- Replace the BCM in accordance with the Service Information. Refer to MODULE, BODY CONTROL, REMOVAL .
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .