Standard Procedure - Clean And Re-Grease Sunroof Guide Tracks

Fig 1: Identifying Wind Deflector

Courtesy of CHRYSLER GROUP, LLC

1. Open glass fully to expose the guide tracks.
2. Hold down the wind deflector (1).
   Fig 2: Identifying Channels

   Courtesy of CHRYSLER GROUP, LLC
3. Wipe out the channels (1) and remove any accumulated dust and debris.
   Fig 3: Applying Mopar Grease To Tracks

   Courtesy of CHRYSLER GROUP, LLC
4. Using Mopar Grease P/N 68079674AA with a small brush (1), apply grease (2) to the tracks as shown.
5. Cycle the glass open and close to verify high operating noise no longer exists. Repeat process if necessary.