Front Hub And Bearing - Removal

REMOVAL

1. Raise and support the vehicle.
2. Remove the wheel and tire assembly. Support the caliper, Do not let the caliper hang by the hose.
3. Remove the disc brake caliper (1) Disc Brake Caliper - Removal.
4. Remove the brake caliper adaptor (1) Disc Brake Caliper Adapter - Removal.




5. Remove the disc brake rotor (3) Brake Rotor - Removal.





6. Remove the wheel speed sensor bolt (2).





7. Remove the wheel speed sensor (1) through the hole in the brake shield (2)Front.





8. Remove the axle shaft nut if equipped.
9. Remove the 3 hub bearing mounting bolts (3) from the back of the steering knuckle. Remove hub bearing from the steering knuckle.