LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Wrangler V6-3.6L >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Brake Caliper >> Service and Repair >> Removal and Replacement >> Disc Brake Caliper Adapter - Installation >> Front

Front






FRONT





1. Install the caliper adapter mounting bolts (1). Tighten the mounting bolts to 163 Nm (120 ft.lbs).
2. Install the inboard (2) and outboard pads (3). Brake Pads - Installation.





3. Install the caliper (4) to the adapter (3) Disc Brake Caliper - Installation.
4. Install the tire and wheel assembly. Service and Repair.

scientia non olet · About LEMON Manuals