Driver Side

INSTRUMENT PANEL - DRIVERS SIDE





1. Install the speaker by carefully pulling the left side of the instrument panel (1) outward until there is sufficient room to install the speaker through the end cap area.





2. Connect the speaker electrical connector.
3. Install the driver side lower speaker mounting retainer (1).





4. Install the speaker mounting fasteners (1).
5. Connect the electrical connector.





6. Install the driver side lower instrument panel retainer (1) next to the DLC connector.





7. Install the instrument panel cover steering column opening cover retainers (1).





8. Install the reinforcement plate and steering column opening cover Steering Column Opening Cover - Installation.





9. Install the instrument panel end cap (1).
10. Connect the negative battery cable.