Auto Sway Bar System (ASBS)

U0415-IMPLAUSIBLE DATA RECEIVED FROM ABS

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the ignition on for four seconds, no CAN bus circuit error condition present, no lost communication with Anti-lock Brake System (ABS) Module condition present, and no system undervoltage or overvoltage condition present.

- Set Condition:
The Automatic Sway-Bar System (ASBS) Module is receiving implausible data for vehicle speed, wheel speed.





ABS DTCS PRESENT
1. Ignition on, engine not running.
2. With the scan tool, read DTCs in the ABS Module.

Are there any DTCs present?

Yes

- Testing and Inspection and perform the appropriate diagnostic procedure.

No

- Replace the Automatic Sway-Bar System (ASBS).
- Perform the ASBS VERIFICATION TEST. ASBS Verification Test.