Totally Integrated Power Module (TIPM)

B2206-CURRENT VIN MISSING / MISMATCH

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the ignition on.

- Set Condition:
A Powertrain Control Module (PCM) from another vehicle has been installed in the vehicle.





1. PCM FROM ANOTHER VEHICLE INSTALLED

NOTE: This Diagnostic Trouble Code (DTC) is set when a PCM from another vehicle is installed into the current vehicle.

Has another PCM been installed?

Yes

- Replace the Powertrain Control Module.
- Perform the POWERTRAIN VERIFICATION TEST. Powertrain Verification Test.

No

- Go To 2

2. OTHER CAN-C MODULES SET VIN MISMATCH

Is VIN Mismatch DTC set in other CAN-C modules?

Yes

- Replace the Powertrain Control Module.
- Perform the POWERTRAIN VERIFICATION TEST. Powertrain Verification Test.

No

- Replace the Totally Integrated Power Module.
- Perform the BODY VERIFICATION TEST. Body Verification Test.