Removal - SRT Only
NOTE:
The Daytime Running Lamps (DRL) for non-SRT vehicles are integral to the front lamp units.
- Disconnect and isolate the battery negative cable.
- Remove the fascia from the front of the vehicle. Refer to FASCIA, FRONT, REMOVAL .
- Disconnect the wire harness connections to the Daytime Running Lamp (DRL) (1) and the front fog lamp bulb on the back of the front fascia (5).
- Remove the five screws (2) that secure the DRL and the front fog lamp bracket (3) to the back of the front fascia.
- Remove the DRL and the front fog lamp from the back of the front fascia as a unit.
- Remove the two screws (4) that secure the front fog lamp bracket to the outboard end of the DRL housing.
- Remove the front fog lamp and bracket from the DRL housing.