Cover, Seat Cushion, Front: Removal: Removal

Fig 1: Cushion Straps & Bolts

Courtesy of CHRYSLER GROUP, LLC

1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to SEATS, WARNING .
2. Move the seat to the forward position and disconnect and isolate the negative battery cable.
3. Remove the bolts (2) and the straps (1).
4. Disconnect the electrical connector, if equipped.
   Fig 2: Front Seat Cushion

   Courtesy of CHRYSLER GROUP, LLC
5. Lift the front of the seat cushion (2) up and slide out from under the seat back cushion (1).