LEMON Manuals: Even more car manuals for everyone

Home >> Jeep >> 2012 >> Compass 2WD L4-2.4L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Lighting and Horns >> Backup Lamp Switch >> Service and Repair >> Backup Lamp Switch - Removal

Backup Lamp Switch - Removal

REMOVAL

1. Lift vehicle on hoist.
2. From bottom side of vehicle, disconnect back-up lamp switch connector (2).

3. Unscrew switch (2) from transaxle.

scientia non olet · About LEMON Manuals