Washer Nozzle - Installation

FRONT





1. Position the front washer nozzle (3) to the mounting hole on the outside of the hood panel (1).
2. Align the anti-rotation tab of the nozzle with the anti-rotation notch in the mounting hole.
3. Using hand pressure, push firmly and evenly on the top of the nozzle until the integral latch feature locks into place on the underside of the hood panel.
4. From the underside of the hood, reconnect the washer hose connector (2) to the barbed nipple of the nozzle.
5. Close and latch the hood.